Computer numerically controlled (CNC) punching is a sheet metal manufacturing process that is carried out by CNC punch presses or turret presses. Simply put, CNC punching is used to cut holes in different types of materials. Punching is applicable to a wide variety of materials that come in sheet form, including sheet metal, paper, vulcanized fibre and some forms of plastic sheet. These machines can be either a single head and tool rail design or multi-tool turret design. The CNC punching machine is programmed to move a sheet of metal in an X and Y direction so as to accurately position the sheet under the machine’s punching ram ready to punch a hole or form. A punching machine is a machine tool for punching and embossing flat sheet-materials to produce form-features needed as mechanical element and/or to extend static stability of a sheet section.
The processing range for most CNC punch presses is 0.5mm to 6.0mm thick in a range of materials. Commonly including steel, zintec, galv, stainless steel and aluminium. The choice of hole punched can be as simple as a circle or rectangle right through to special shapes to suit a specific cut out design. By using a combination of single hits and overlapping geometries, complex sheet metal component shapes can be produced. Our machines also punch 3D forms such as dimples, taptite® screw thread plunges, and electrical knockouts on either side of the sheet, which are often employed in sheet metal enclosure design. Some modern machines like ours have the ability to tap threads, fold small tabs, punch sheared edges without any tool witness marks making the machine very productive within the component cycle time. The instruction to drive the machine to create the desired component geometry is known as the CNC program.
Other processes such as stamping, blanking, perforating, parting, drawing, notching, lancing and bending materials are all forms related to CNC punching.